Spell Power
Every spell uses a spell power value to determine their effects: damage, range, duration, etc. You can display your spell power for known spells by bringing up your spell list with I, then !, which will display a screen looking like this:
Your Spells Power a - Sting 100% c - Call Imp 44% d - Iron Shot 11%
Each individual spell has a spell power cap placed on it. A cap of 100 means that if your spell power is higher than 100, it will be set to 100. This allows for low-level spells to scale quickly with skill, but prevents them from getting too strong.
Contents
Formula
Raw power
First, the game calculates raw spell power using the following formula.
((Spellcasting / 2) + (2 * [average_spell_schools])) * enhancers * (Intelligence / 10) * mutations
- Average spell schools is the average of all the skills necessary for the spell - up to three schools for some spells (e.g. Mephitic Cloud, which requires Conjurations, Alchemy, and Air Magic).
- Spell Enhancers include magical staves, brilliance, Archmagi, etc. Every enhancer adds one to this count, every dampener subtracts one. If positive, your spell power is multiplied by 1.5(enhancers). If it is negative, it is multiplied by 0.5(-enhancers). Enhancers are capped at ±3.
- Mutations add a multiplier, depending on the mutation in question.
- Wild Magic increases your spell power, but decreases your success rate. The bonus is ×1.3, ×1.6 or ×1.9 depending on how many levels of this mutation you have.
- Subdued Magic decreases your spell power, but increases your success rate. The penalty is /1.3, /1.6, or /1.9 depending on how many levels of this mutation you have. This is equivalent to x0.77, x0.63, or x0.53.
- Augmentation is a demonspawn mutation which increases your spell power and gives a slaying bonus at high HP. The spellpower bonus is ×1.4, ×1.8 or ×2.2 depending on how much augmentation bonus you have. This stacks multiplicatively with the other mutations.
- Ru's Sacrifice Courage decreases your spell power by 10% for each level of horror.
| Mutation Level | HP <50% | HP > 50% | HP >66% | HP >75% | HP >83% |
|---|---|---|---|---|---|
| 1 | 0 | 1 | 1 | 1 | 1 |
| 2 | 0 | 1 | 1 | 2 | 2 |
| 3 | 0 | 1 | 2 | 2 | 3 |
Step down
Once the raw spell power value is determined, a stepdown function is applied to obtain the real spell power:
Spellpower = 50 * log_2(1 + raw_power/50) IF raw_power > 50
This is capped at 200. If power is under 50, the raw spell power is used with no modification.
Approximately, every 50 real spell power is twice as difficult to obtain, with an absolute maximum of 200 real spell power. For example, 50 raw spell power is equivalent to 50 real spell power; 100 raw spell power is equivalent to 50 + 50/2 = 75 real spell power; and 500 raw spell power is equivalent to 50 + 100/2 + 200/4 + 150/8 = 168 real spell power. The maximum of 200 real spell power is reached at 750 raw spell power.
Example calculations
Base Value = (Spellcasting / 2) + (2 * [average_spell_schools])
The base value of spell power, before enhancers/INT/mutations, is capped at 67.5.
Without any enhancers, in order to reach 150 spell power, an INT of 52 is required: 67.5 * 52/10 = 351.
The following table documents the required base value to reach a given spell power at 40 INT, for a given # of enhancers:
| # of Enhancers | 100 Power | 150 Power | 200 Power |
|---|---|---|---|
| 0 | 37.5 | 87.5 | 187.5 |
| 1 | 25 | 58.3 | 125 |
| 2 | 16.7 | 38.9 | 83.3 |
| 3 | 11.1 | 25.9 | 55.6 |
| 1 + Wild magic 2 |
12.5 | 29.2 | 62.5 |
Maximum spell power can only be accomplished with three enhancers, assuming 40 INT and no mutations. If one has Wild Magic Lv 2, then only one enhancer can max out your spell power. However, in this situation, spellcasting success rate falls off dramatically, forcing the player to use a ring of wizardry. Demonspawn with Augmentation 1 can enjoy max spell power with two enhancers, while one with Augmentation 3 can enjoy maximum spell power with only one enhancer.
Spell Range
For most spells, range is unaffected by power. But for a few spells like Dispersal, the range increases based on spell power. Range (approximately) increases at a linear rate, so at half power, you are halfway between the minimum and maximum range.
Specifically, if the spell power (pow in the following) is above the power cap, the spell has maximum range. Otherwise:
range = minrange + [(power / powercap) * (maxrange - minrange)] ; round half up
Monsters
For monster spells, the spellpower is usually 12 * HD.[1] Although, some spells have a different HD factor:
- Cause Fear: 18
- Call Down Lightning: 16
- Doom Howl and Mesmerize: 10
- Siren Song and Avatar Song: 9
- Mass Confusion and Confusion Gaze: 8
- Olgreb's Toxic Radiance, Orb of Destruction, and Freeze: 8
- Monstrous Menagerie, Iskenderun's Battlesphere, Ignite Poison, and Irradiate: 6
- Summon Dragon and Summon Hydra: 5
- Chain of Chaos: 4
Please note that most monster spells have different damage formulas than the player version. For example, players cast Magic Dart dealing 1d(3 + power/5) damage, while monsters cast it at 3d(4 + power/100).
History
- Prior to 0.31, monsters' OTR used 8 * HD spellpower instead of 12 * HD.
- In 0.28, the last two spells which didn't involve spell power (Blink and Passage of Golubria) now use it.
- Prior to 0.26, spell power display was fuzzed, displayed in terms of bars (##.) instead of percentages. Bars did not have equal value; lower bars represented less numerical power per bar.
- Prior to 0.18, the Wild and Subdued Magic mutations had larger effects on spellpower.
- Prior to 0.10, a different stepdown function for spellpower was used.
References
- ↑ mon-cast.cc:1104 (0.30.1)
